R1200 & R1250 GS Adventure LC Printed Black Top Box wrap ki

£50.00

5.0 average, based on 1 reviews

Product Code: R12GSA LC Black print t box wrap

Manufacturer: Humvee Graphics

Clear vinyl with Black & Grey print design  Wrap Kit for BMW Top Box, suitable only for 2014 - 2018 R1200 GS Adventure and 2019 > R1250 GS Adventure  (Liquid Cooled models only). 

Our latest design of wrap kit for the GSA LC aluminium Top Box to match the Black printed pannier design, to the rear side panel the design features a World map in Clear with the correct font "GS" letters and ADVENTURE word in Grey, both side panels feature a partial compass design with the words ADVENTURE, TOUR, TRAVEL ENDURO on alternate sides.

Kit comprises; individual sheets and 2 test pieces supplied with each kit to protect every panel, 2 back rest pieces supplied 1 for fitting with and 1 for fitting without backrest pad.

Pre-cut to fit each panel. Supplied with instruction guide and application hints. These kits are cut to allow a small (2mm) gap between each panel to allow for ease of application (no butting together of individual pieces required). The kits are designed to be applied using the wet method of application, thoroughly clean the surface, spray the surface with a mild soap & water solution, apply the vinyl and squeegee out the water, for application you will need; a clear and clean workspace, a hand held spray bottle, a rubber squeegee or similar (a credit or bank card will work) to smooth the vinyl and a little patience. You need to be reasonably confident and accomplished at applying vinyl decals to apply this kit. Supplied on a continuous roll of vinyl, all pieces are pre-cut and can be peeled from the roll individually. Kits are packaged and sent in a cardboard poster tube to protect the contents. NOTE; Suitable only for later model 2014 onward to 2019 model Liquid Cooled Aluminium Top Boxes, these kits will not fit earlier models, we list a kit for earlier air cooled (up to 2013) elsewhere in our shop. See our other listings for the above kit in Clear vinyl and similar kits for the later model 2014 - 2019 onward Aluminium Panniers also.

Please note; images show top box wrap in this design, notice that this design is printed onto a clear vinyl so the majority of the area covered is Black (with Grey wording) areas not printed will appeaer clear or transparent, the finish of the vinyl is a semi Gloss

This listing is for a Black Printed Clear vinyl Wrap Kit for BMW Aluminium Top Box, suitable only for 2014 onward to 2019 model (Liquid Cooled models) only.

Note; ALL OUR WRAP KITS ARE SENT AS A CARDBOARD POSTER TUBE PACKAGE, THESE WILL NOT FIT THROUGH A STANDARD LETTERBOX OPENING, WE SUGGEST YOU CONSIDER UPGRADING THE SHIPPING TO A TRACKED & SIGNED SHIPPING AS A MORE SECURE (AND POSSIBLY MORE RELIABLE) SHIPPING METHOD.

WE RETAIN PROOF OF POSTING AND POSTAL RECEIPTS FPR ALL ORDERS SHIPPED BUT WE CANNOT SUPPLY YOU WITH TRACKING INFORMATION IF YOU DO NOT SELECT THE OPTIONAL TRACKED MAIL SERVICE. 


Customer Reviews

Top Quality Vinyl

This vinyl wrap for my top box really looks impressive. You even get different cut out sections for top boxes with back rests and without back rests. I can only stress that take your time with preparation, really use a good degreaser or white spirit and dry off completely, you’ll be surprised how much grime lifts off a clear looking pannier/top box. Vinyl is real quality, I’ve used others that cost more and look less impressive, The ‘panels’ are clearly labelled. It’s best to layout one section at the time and cut out each section to be applied. You get a few test pieces to get the hang of applying vinyls, A must is, read the instructions. Wet the pannier/top box wet the vinyls, wet your fingers to stop ‘body grease’ making contact with vinyl. I applied mine complete then applied hair dryer heat to really push out excess water. Take your time applying a little heat, don’t ‘cook it’.

Andrew Frost :: 08 May 2019, 10:30

Write a review

Copyright © Humvee Graphics 2017

Humvee Graphics uses cookies. For more detailed information about these cookies please see our privacy policy. Please accept to continue or block all non-essential cookies.

I accept cookies from this site.